Blogs
Home » Blogs

aac block factory

A list of these aac block factory articles makes it easy for you to quickly access relevant information. We have prepared the following professional aac block factory, hoping to help solve your questions and better understand the product information you care about.
  • 2022-05-17

    Autoclaved aerated concrete, referred to as AAC blocks, is a lightweight, prefabricated, foam concrete building material used to make blocks. It is an alternative to traditional red bricks. Builders should keep themselves up to date with the latest trends and technologies, especially new green building materials like AAC blocks.

  • 2022-05-05

    AAC blocks and AAC panels are used in a wide variety of projects, such as commercial, factory and residential buildings, etc. AAC products are easy to install, have a wide range of applications, and are highly accurate in construction, while greatly improving building performance and reducing construction costs. There are many commonalities between AAC blocks and AAC panels, however, there are some subtle differences between them in terms of specifications, performance, construction, decorations, construction speed and quality.

  • 2022-04-21

    Autoclaved Aerated Concrete (AAC) blocks are lightweight and durable building materials that are widely utilized in the construction industry. The world's leading AAC block manufacturers provide high-quality AAC blocks designed to provide superior strength and ultra-long term protection. Due to their construction composition and superior compressive strength, they are favoured over traditional laterite blocks in modern construction projects.

  • 2022-04-13

    lf you are a homeowner or a house builder, you need to know the difference between the ACC blocks and the red bricks. In terms of which one existed first,the red bricks are the oldest building material used in the construction compared to the ACC blocks. People were looking for more sustainable building materials, and ACC blocks are an ideal choice.

  • 2021-03-18

    Autoclaved Sand Aerated Concrete or Autoclaved Ash Aerated Concrete?Have you ever bought the AAC products? Do you really understand AAC products? Generally speaking, AAC stands for autoclaved aerated concrete; and AAC also can be divided into two main products according to different raw materials, one is called autoclaved sand aerated concrete and the other is called autoclaved ash aerated concrete. Introduction of the Sand AAC. Introduction of the Ash AAC. The differences between sand AAC and ash AAC 1. Raw materials 2. Appearance color 3. Accuracy 4. Compressive strength 5. Dry shrinkage 6. Ingredient 7. Frost resistance 8. Toughness and brittleness 9. Environmental protection and energy consumption Overall, the sand AAC has better performance; and the Ash AAC is more economical.

  • 2020-11-13

    The Chinese Chamber of Commerce in Cambodia is a self-regulatory and non-profit organization established by Chinese-funded enterprises in Cambodia under the guidance of the Economic and Commercial Office of the Embassy of the People’s Republic of China in Cambodia and approved by the relevant depart

  • 2020-11-13

    In 2017, the McKinsey Global Institute (MGI) emphasized that the construction industry needs to be upgraded. If the upgrade is successful, it can eventually increase productivity by 50% to 60%, which is equivalent to an incremental value of USD 1.6 trillion per year worldwide. The clarion call for a

  • 2020-11-13

    There are a full range of tools that are specially designed to assist the block layer in installing AAC masonry products and increase productivity at the job site. Installation Steps:Step 1 - Layout wall lines Step 2 - Start the leveling bed Step 3 - Set the first corner block Step 4 - Mix thin-bed mortar Step 5 - Set second corner block Step 6 – Repeat for additional corners Step 7 - Fill-in completion of level course Step 8 - Install lintels as required

  • 2020-10-14

    Until now, autoclaved aerated concrete (AAC) was widely used in the construction industry mainly as a relatively simple (commodity) wall building material. The need and regulatory pressure for green, energy neutral buildings for residential housing and nonresidential constructions is becoming stronger every day. Consequently, we must challenge our construction designs and way of building to deal with increasing regulations, climatic and seismic conditions around world's geographical areas. This article presents new generation panel construction methods and a realized case study for a passive residential housing project designed with mid‐size modular AAC panels. The role and importance of this building method, applied with light‐ and heavy‐reinforcement panels, is also highlighted. The structural AAC panel design will be complemented and finished with autoclaved lightweight concrete (ALC) blocks, drywall sheets, and AAC partition panels. This partnership of building materials with insta